AGFA Drystar 5302 Reference Manual page 147

Press the Confirm key to store the data, or the Escape key to quit the procedure
5
without any changes.
The 'Select modality type' screen is displayed:
2 MXVIEW
3 MX800
Press the up/down arrow keys to select the appropriate modality type.
6
Press the Confirm key to store the data, or the Escape key to quit the procedure
7
without any changes.
The 'Enter modality AE-title' screen is displayed.
Enter the modality AE-title by means of the arrow keys.
8
Refer to 'Data entry'
Press the Confirm key to store the data, or the Escape key to quit the procedure
9
without any changes.
The 'Select preferred FILM TYPE for' screen will appear:
<modality name>
1*Drystar DT 2B
2 Drystar DT 2C
You can find the film type on the film packaging, e.g. 'DRYSTAR DT 2C'.
Press the up/down key to select the preferred film type for this modality.
10
If the current film type in the trays does not match the selected film type, the
following message is displayed:
\Modality name>
AVAILABLE IN INPUT
TRAY Use the
selected film type?
YES(v)
2830A EN 20050526
on page 31. The modality AE-title is limited to 16 characters.
NO(x)
D 5302 R
RYSTAR EFERENCE MANUAL
Advanced operation (Key-operator mode)
147