AGFA Drystar 5302 Reference Manual page 88

D 5302 R
RYSTAR EFERENCE MANUAL
Press the Confirm key to store the data, or the Escape key to quit the procedure
13
without any changes.
The 'Select preferred FILM TYPE for' screen will appear:
<modality name>
1*Drystar DT 2B
2 Drystar DT 2C
You can find the film type on the film packaging, e.g. 'DRYSTAR DT 2C'.
Press the up/down key to select the preferred film type for this modality.
14
If the current film type in the trays does not match the selected film type, the
following message is displayed:
\Modality name>
AVAILABLE IN INPUT
TRAY Use the
selected film type?
YES(v)
Press the Confirm key to store the data, or the Escape key to quit the procedure
15
without any changes.
The data entry for the new modality is finished now.
The printer will ask you if you want to add another modality:
If you wish to add another modality, press the Confirm key (YES). You will be
16
taken back to step
If you do not wish to add another modality, press the Escape key (NO). The
17
printer will return to the Network (DICOM) menu.
88
Advanced operation (Key-operator mode)
NO(x)
4 to repeat the procedure.
2830A EN 20050526