AGFA Drystar 5302 Reference Manual page 190

D 5302 R
RYSTAR EFERENCE MANUAL
Press the Confirm button.
3
•
If the "Overrule RF-tag Reading" Setting is active, the following message is
displayed:
OVERRULE
IDENTIFICATION CODE
IS ACTIVE
Dmax is limited due
to safety reasons
•
If the "Overrule RF-tag Reading" Setting is not activated, the following
message will be displayed:
Re-enable printing
by inserting correct
film media pack.
In this case, press the Confirm key to initiate the loading procedure again or call
your local service organization to enable the "Overrule RF-tag Reading" Setting.
Press the Confirm key again to resume printing using a limited Maximum
4
Density.
Invalid content of Film Identification tag
When you insert a new film pack with invalid content in the Film
Identification tag, the following message is displayed:
Try loading another film pack, or call your local service organization to
resolve this problem.
190
Troubleshooting 2830A EN 20050526