AGFA Drystar 5302 Reference Manual page 54

D 5302 R
RYSTAR EFERENCE MANUAL
Accessing the key-operator menus
•
The key-operator mode functions (i.e. the main menu level) can be
accessed by pressing the Key-operator key on the front panel.
After pressing the Key-operator key the main menu is displayed:
The two characters displayed in inverse video in the upper right corner indicate the
current menu item (e.g. 'KO' for main Key-operator menu, 'QC' for Quality
Control, etc.).
5 Restore config.
6 Calibration
7 Service Actions
8 Quality Control
9 Installation
When you try to enter the key-operator mode while the Drystar 5302 is printing, it
will first finish the active print job(s):
If certain mandatory site-specific data has not yet been entered, the following
screen is displayed when entering the key-operator mode (refer to
site-specific data (via remote browser only)'
•
You can scroll through the menu items by pressing the Down and Up keys
and select a menu item by pressing the Confirm key. The active keys are
indicated by their respective LEDs.
54
Advanced operation (Key-operator mode)
Blinking
on page 73):
'Changing the
2830A EN 20050526