AGFA Drystar 5302 Reference Manual page 13

Transport after installation
Before moving the printer, always switch off the machine. The Drystar 5302
should be transported by 3 persons or if not possible with 2. Refer to the
Installation manual for more information. When doing this, the stability and
the structure of the tabletop have to be taken into account. The printer should
not be placed on a soft surface, since this might prevent appropriate
ventilation and cause overheating. The printer must only be transported with
all covers closed. The appliance may not be transported continuously from
one location to the other. Do not lift the printer by the output tray.
Waste disposal and environmental regulations
In most countries Drystar film is considered industrial waste and
consequently it is not allowed to be disposed as household waste.
Please consult your local waste disposal regulations. Agfa
recommends having waste Drystar film collected by a licensed
company.
After its life span, do not dispose of the Drystar 5302 without
consideration of local waste disposal legislation and regulations.
Please consult your local service organization.
2830A EN 20050526
D 5302 R
RYSTAR EFERENCE MANUAL
Introducing the Drystar 5302
13