Changing The Printer Ae-Title - AGFA Drystar 5302 Reference Manual

D 5302 R
RYSTAR EFERENCE MANUAL
Changing network (DICOM) configuration

Changing the printer AE-title

Perform steps 1 to 2 of the
1
page 68.
On the Change settings menu, press the Down key three times, followed by the
2
Confirm key to select 'Network (DICOM)'.
The 'Network (DICOM)' screen is displayed:
5 Netmask
6 Router IP-address
7 Remove modality
8 Add modality
Press the Confirm key to select 'Printer AE-title'.
3
The 'Printer AE-title' screen is displayed:
If the printer AE-title has already been assigned, it will be shown on the display.
Change the printer AE-title by means of the arrow keys. Refer to
4
page 31. The printer AE-title is limited to 16 characters.
Entries are case sensitive.
Press the Confirm key to store the data, or the Escape key to quit the procedure
5
without any changes.
78
Advanced operation (Key-operator mode)
'Accessing the Change settings menu' procedure on
'Data entry' on
2830A EN 20050526