AGFA Drystar 5302 Reference Manual page 47

Remove the white (protective) film sheet.
3
Take film pack, and open it.
4
Verify that the film type on the film pack corresponds with the sticker on the tray! If
you do use an other film type, you are advised to change the label on the tray.
You can put the film pack onto a table to make manipulation easier. Before you do
this, make sure that the table is dust-free!
Remove the sticker from the film pack.
5
2830A EN 20050526
D 5302 R
RYSTAR EFERENCE MANUAL
Basic operation (Operator mode)
47