The Display - AGFA Drystar 5302 Reference Manual

The display

The Drystar 5302 control panel has a backlit LCD display. We distinguish two
panel types depending on the selected language:
•
a backlit LCD display with 4 lines for Western languages (e.g. Dutch,
French, Portuguese, Swedish, ...).
•
a backlit LCD display with 2 lines for all other languages (e.g. Greek,
Chinese, Korean, Polish,...).
Whether a display is translated or not depends on the operating mode.
General display features
The figure below shows how the display is illustrated in this manual:
5 Restore config.
6 Calibration
7 Service Actions
8 Quality Control
9 Installation
The visible display lines are indicated in the upper zone. The other possible
lines are shown in the lower zone and can be reached by scrolling using the
Up/Down arrow keys on the Keypad.
In the upper right corner, the current printer status is displayed:
•
In Operator mode, two characters display the print queue status. Refer to
'Managing the print queue'
•
In Key-operator mode, two characters are displayed in reverse video to
indicate the current menu- or submenu level (e.g. 'KO' for Key-operator
main level).
• A warning, an error or a maintenance request is displayed respectively with
the character W, E and M.
2830A EN 20050526
Visible
Reachable with Up/Down arrow keys
on page 37.
D 5302 R
RYSTAR EFERENCE MANUAL
Introducing the Drystar 5302
29