Saving The Configuration - AGFA Drystar 5302 Reference Manual

Saving the configuration

You need to complete this step, otherwise all the install data you have
entered will be lost!
The printer settings are saved automatically to the hard disk.
1
When 100% is reached, the following 'Save configuration' screen will ask you to insert
the back-up CF-card:
Insert a CF-card.
2
Refer to
As soon as the CF-card is inserted, the 'Copy' screen is displayed.
C <path><filename>
A <path><filename>
The printer saves the configuration on the external CF-card
When the writing of the save set is finished, the printer will ask you to remove the CF-
card:
Remove the CF-card.
3
Refer to
As soon as the CF-card has been removed, the following screen is displayed:
The <save set name > is preceded by the characters "BAC". BAC stands for General
backup.
2830A EN 20050526
'Inserting a CF-card' on page 25.
'Removing a CF-card'
BAC_<save_set_name>
on page 26.
D 5302 R
RYSTAR EFERENCE MANUAL
Advanced operation (Key-operator mode)
149