Remove The Alignment Unit - Epson PR9 User Manual

4.1.2 Remove the Alignment Unit

S Power the printer off
S Open the Top Cover
S Swivel the green print unit lift handle (see the photo on the page before) backwards to
lift the print unit entirely.
S Press both Levers (2) to the outside of the printer
S Swivel the Alignment Unit up to about 45 . Now the Pins (3) on both sides of the
Alignment Unit (1) are in the correct position.
S Lift the Alignment Unit (1) out of the printer.
Note:
Both pins (3) are flatten and so is it only possible to take out the Alignment Unit in
an angle of 45 !
Maintenance
4-3