Table of Contents
Advertisement
Appendix C
IBM ProPrinter X24 and IBM ProPrinter II Commands
ESC d n1 n2
Relative Forward Horizontal Movement
where
n1 = 00 - FF
n2 = 00 - FF
Moves the current horizontal position to the right at a distance specified in the n1 and n2
parameters.
The distance is computed from the parameters using :
distance = (n2 * 256) + n1
The distance is specified in dot units using 1/120 inch as horizontal resolution.
Spaces produced by this command are affected by underscore, overscore, and
strikethrough. If it goes beyond the right margin, current horizontal position is set to the
right margin.
ESC R
Clear All Tabulation Stops
Deletes all the horizontal tabulation stops set by ESC D .. and all vertical tabulation stops
set by ESC B ...
For the horizontal tabulation stops, the default condition is restored:
one stop every 8 characters.
C-20
Hexadecimal code: 1B 64 n1 n2
Hexadecimal code: 1B 52
Advertisement
Table of Contents
