C.2.2 Margins - Epson PR9 User Manual

Appendix C IBM ProPrinter X24 and IBM ProPrinter II Commands
C.2.2 Margins
S ESC 4 :
S ESC C n :
S ESC C NUL n : Form length in inches
S ESC N n :
S ESC O :
S ESC X n1 n2 :
ESC 4
Top of Form
Sets the first line of the form in the current position. It does not change the current form
length.
ESC C n
Form Length in No. of Lines
n = 1 - 255
Defines the form length as a number of print lines. The space occupied depends on the
value of the current line feed. This space remains unchanged, even if the line feed is
changed, until the printer is switched off or a new form length command is received.
Resets the line counter and fixes the current position as the start of the page (top of form).
ESC C NUL n
Form Length in Inches
n = 1 - 30
Defines the form length directly in inches (30 max). One inch is equal to 25.4 mm. It resets
the line counter and sets the top of form at the current position.
C-6
Top of form
Form length as no. of lines
Bottom of form
Cancel bottom of form
Left and right margins
Hexadecimal code: 1B 34
Hexadecimal code: 1B 43 n
Hexadecimal code: 1B 43 00 n