Table of Contents
Advertisement
Appendix D EPSON LQ-Emulation Commands
ESC J n
Advances the vertical print position
Hex:
(1B 4A n)H
Decimal:
(27 74 n)D
Octal:
(33 112 n)O
Advances the vertical print position n / 180 inch
The value of n should be 01H - FFH (1D - 255D).
ESC j n
Reverse paper feed
Hex:
(1B 6A n)H
Decimal:
(27 106 n)D
Octal:
(33 152 n)O
This command prints data in the buffer, then reverse feed paper n / 180 inch, the value of
n is in 01H - FFH (1D - 5D).
ESC + n
Set line spacing as n/360 inch.
Hex:
(1B 2B n)H
Decimal:
(27 43 n)D
Octal:
(33 53 n)O
LF
This command prints the current line buffer and move the current vertical position to the
next printing line (using the existing line pitch).
Hex:
(0A)H
Decimal:
(10)D
Octal:
(12)O
D-12
Advance n / 180 inch vertically
Reverse Feed Paper n / 180 inch
Set Line Spacing as n/360 inch
Line feed
Advertisement
Table of Contents
