Epson PR9 User Manual page 36

Configuring the Printer
Parameter
SPECIAL FORMS
BIM DIRECTION
NEEDLE COMPENSATION
Needle Position
HS COMPENSATION
BROKEN NEEDLE NO.
PNS SELECTION
PNS #2000K
3-8
CONFIGURE
Option Explanation
NO YES reduce the speed of
YES paper handling, and add
some special management
to support special forms,
e.g. thin paper, paper with
different thickness.
UNIDIRECTION Select printing direction for
BIDIRECTION graphics.
NO Select needle
YES compensation or not when
the needle is broken.
NO Select heigh speed
YES compensation or not
1 Choose the one needle
up to from needle 1 up to needle
24 24 for compensation.
YES Whether the following PNS
NO items are valid or not.
SINGLE SHEET The selection will influence
205 mm the ejection of the paper.
220 mm Single Sheet means A4
Note
Only displayed if
NEEDLE
COMPENSATION
is set to YES
Only displayed if
NEEDLE
COMPENSATION
is set to YES
Only displayed if PNS
SELECTION
is set to YES