Table of Contents
Advertisement
Appendix D EPSON LQ-Emulation Commands
D.2.9
Other Functions
S CAN :
S DLE B :
S ESC BEL n :
S ESC R n :
S ESC @
CAN
Clear the print buffer
Hex:
(18)H
Decimal:
(24)D
Octal:
(30)O
DLE B
This command clears buffer and initializes printer, it sets all the parameters to the power-
on default conditions.
Hex:
(10 42)H
Decimal:
(16 66)D
Octal:
(20 102)O
ESC BEL n
This command causes to print data in the current buffer and change emulation to the
corresponding one according to the value of n.
Hex:
(1B-07-n)H
Decimal:
(27-07-n)D
Octal:
(33-07-n)O
n = 'E':
Change into OLIVETTI emulation.
n = 'F':
Change into IBM emulation.
Change into OKI emulation.
n = 'G':
All other values of n will be ignored.
Note.
D-28
Clear print buffer
Soft initialization
Change Emulation
Select code table
Clear buffer
Soft initialization
Change Emulation
Advertisement
Table of Contents
