C.2.4 Print Pitches - Epson PR9 User Manual

C.2.4 Print Pitches
S DC2 : 10 cpi (Pica)
S ESC : : 12 cpi (Elite)
S ESC P n:
Proportional spacing
S FS S n1 n2 : Adjust characters space
S SI: 16.6/17.1 cpi (Condensed)
DC2
10 cpi (Pica)
Cancels the print pitches set using SI and ESC :, restoring 10 cpi. It does not cancel
Double width.
ESC :
12 cpi (Elite)
Sets 12 characters per inch starting from the current position.
Cancelled by DC2, which restores 10 cpi (Pica).
ESC P n
Proportional Spacing
Selects printing with proportional spacing.
In this way, the print pitch changes from one character to another, according to their width.
Proportional spacing is canceled by any command that changes the print pitch.
Parameter n may be set to the following values:
n = 1 (1 or 49)D :
n = 0 (0 or 48)D :
Takes priority over a different setting made on the operator console.
Note:
Appendix C IBM ProPrinter X24 and IBM ProPrinter II Commands
sets proportional spacing
cancels proportional spacing
Hexadecimal code: 12
Hexadecimal code: 1B 3A
Hexadecimal code: 1B 50 n
C-11