Other Functions; C.2.9 Other Functions - Epson PR9 User Manual

C.2.9

Other Functions

CAN :
S
DC1 :
S
DC3 :
S
ESC 5 n :
S
ESC 6 :
S
ESC 7 :
S
ESC \ n1 n2 :
S
ESC ^ :
S
ESC BEL E :
S
ESC Q ETX :
S
CAN
Clear Buffer
Clears the contents of the print buffer; all the data is lost.
The current printing position remains unchanged.
DC1
Activate Printer-System Connection
Sets the printer "on-line" until a DC3 is received.
DC3
Deactivate Printer-System Connection
The printer sends this command via the serial interface to indicate that the buffer is full.
With a parallel interface, it is considered a NUL.
ESC 5 n
Automatic Line Feed after CR
Sets/cancels the execution of an automatic line feed when a CR is received. It takes
priority over the setting made in the SET-UP.
n = 1 (1 or 49)D: automatic LF after CR (CR=CR+LF).
n = 0 (0 or 48)D: no automatic LF after CR (CR=CR).
Appendix C IBM ProPrinter X24 and IBM ProPrinter II Commands
Clear print buffer
Activate printer-system connection
Deactivate printer-system connection
Automatic line feed after CR
Table 2 of character set
Table 1 of character set
Print characters from table 3
Print a character from table 3
Change Emulation
Deactivate printer-system connection
Hexadecimal code: 18
Hexadecimal code: 11
Hexadecimal code: 13
Hexadecimal code: 1B 35 n
C-31