Menu Structure; Explanation Of The Printout On The Previous Page - Epson PR9 User Manual

Configuring the Printer
3.2.1 Explanation of the printout on the previous pages
In the headline behind the term VER2 the revision level of the printer's firmware can be
found.
Then, following the Printer Identification and in the next line a needle test.
The next part of the printout is a list of the MACRO settings.
In this case MACRO 1 is marked with an asterisk (*) which identifies it as the active
macro.
Note:
A "Macro" is a summary of application specific parameter settings for a user. It is
possible to have a total of three macros, each with a different summary of VALUE
settings for different applications.
Whenever you make modifications in the active macro without saving them you will find
the new settings under the heading CURRENT USER. Unless they are saved, the
modifications will stay active only until the printer is switched off. When the printer is
switched on again the macro settings marked with the asterisk will be reactivated.
Note:
The CURRENT USER will be selected by MACRO 1, MACRO 2, or MACRO 3.
3.3

Menu Structure

Press [STATION 2] and [COMPRESS
operation.
The Menu Mode starts with MENU SETUP in level 1.
3-4
] together to start the Menu-Mode in Off-line
*) only for PR 9 with Tractor Option