Epson PR9 User Manual page 38

Configuring the Printer
Parameter
PRINTING MODE
HIGH SPEED PRINTING
CPI
LPI
CHARACTER DEFINITION
LR+CR
LEFT MARG. (1/60")
TOP MARG. (1/60")
CHARACTER SET
IBM CHARACTER SET
3-10
OLIVETTI CONFIGURE
Option Explanation
CHINESE Select the printing mode
LATIN
BIG-5
UNICODE
YES Selecting high speed
NO printing mode.
A4 SHEET NO = no draft mode.
FANFOLD A4 SHEET = always draft
PAPER mode when the paper is A4
Sheet.
FAN FOLD PAPER =
always draft mode when the
paper is fan fold paper.
YES: = the print mode
always is draft.
10, 12, 12.9, 15, Defines the number of
16.6, 17.1, 18, characters printed per inch.
20, 30
5 Defines the number of lines
6 per inch.
8
LQ Selecting the font quality:
OCR-A draft, letter quality, OCR-A,
OCR-B or OCR-B.
DRAFT
NO YES: LF = LF + CR
YES NO: LF = LF
0 To adjust the left margin
-6 up to +6 more to left or right in units
of 1/60" inch (about 4 mm).
0 To adjust the top margin
-6 up to +6 more up or down in units of
1/60" inch (about 4 mm).
OLIVETTI Selecting the character set
IBM/PC as Olivetti or IBM/PC.
PC Selecting the IBM character
ISO set as PC or ISO.
Note
TOF = Top Of Form
Only displayed if
IBM/PC in Character
Set is selected.