Table of Contents
Advertisement
Appendix D EPSON LQ-Emulation Commands
FS 2 n1 n2 d1 d2 ... d72
This command downloads the dot matrix and codes of a user defined character(double
byte character) into printer's RAM, the dot matrix is 24x24, that is 72bytes for dot matrix .
Hex:
(1C 32 n1 n2)H
Decimal:
(28 50 n1 n2)D
Octal:
(34 62 n1 n2)O
n1 and n2 define the specific codes for the user-defined character:
n1 is the high byte, (n1 & 0x7f) must be 0x78,0x79 or 0x7a
n2 is the low byte,
D-40
(n2 & 0x7f)must be in the range of 0x21 to 0x7e.
Load character defined by user
Advertisement
Table of Contents
