Table of Contents
Advertisement
6.2
Document Specification and Technical Instruction
Disposable Form:
S Single sheet or multi-copy paper
S Bill (card)
S Horizontal or vertical passbook
Caution:
If the print media do not accord to the above character, you have to
discriminate it carefully before you use it.
Printing Media Character:
S Input media
S Margin align
S Max thickness
S Max width
S Max length per line 10 CPI (238 mm)
S Standard of top of page of document and passbook
(measured from the character's bottom):
S PR 9 emulation = 4.3 mm
S IBM PP II = 4.3 mm
S The min distance from the last basic printing line to the page bottom margin:
S 5 mm (0.2 inch)
S Min value of document rear (measured from the character bottom):
S PR 9 emulation = 3.1 mm
S IBM PP II = 10 mm
S Min rear value of the passbook page:
S 5 mm
S Left and right margin value of document LH/RH:
S min 3.1 mm ± 0.3 mm
S Left and right margin value of passbook LH/RH
S min 3.1 mm ± 0.3 mm
S Min distance between last basic line character above the cord and horizontal cord:
S 5 mm
S Min distance between last basic line character below the cord and horizontal cord:
S 8 mm
S Distance between character Axial wire and vertical cord
S 5.08 mm
handwork
automatically
2.2 mm
245 mm
Technical Data
6-3
Advertisement
Table of Contents
