Table of Contents
Advertisement
Appendix C IBM ProPrinter X24 and IBM ProPrinter II Commands
ESC BEL E n
Change Emulation
Hexadecimal code: 1B 07 45 n
With n=08 (Hex), change to Olivetti emulation (PR2 or PR40+) previously set in setup.
With n=09 (Hex), change to OKI emulation.
With n=0A (Hex), change to LQ emulation.
ESC Q ETX
Deactivate Printer-System Connection
Hexadecimal code: 1B 51 03
Sets the printer off-line (in LOCAL mode), until the DC1, which restores the connection, is
received.
The third element in the sequence ETX identifies the model of printer connected
(80-column printer).
C-33
Advertisement
Table of Contents
