Load Print Medium; Menu Mode - Epson PR9 User Manual

2.4

Load Print Medium

The Printer can deal with single sheet, cheque, multi copy carbon paper, passbook and
credit card. The Printer will start inserting the sheet automatically when the operator puts
the print medium into paper feeding path. Users needn't bother aligning the print medium
with the left or right border of the Printer. The Printer itself aligns automatically.
Note:
As soon as the auto alignment process starts after you put in a medium, please
release the medium.
Note:
To avoid both poorer printing quality and jam when using a passbook, please make
sure there is no curl or tear on the passbook. In addition, when printing a new
passbook, please fold it toward the opposite direction to flatten it before inserting it
into the Printer.
2.5

Menu Mode

All selectable features are accessible via the operator panel and combined in the Printer
MENU.
This feature provides:
S easy configuration (language, etc.)
S quick parameter changes
S activation of test functions
There are six entry points in the highest level:
S MENU SETUP
S MENU PRINTING Printout of the Menu which is in use.
S PRINTING TEST
S
ADJUSTMENT
S DEBUG TEST
S INFO INQUIRY
Set up the Menu parameters for various modules (common
configuration and different emulation) and the important Save
function is included.
A printout of the user s guide, the ASCII character sets, Chinese
character set, and character attributes is possible.
Include printing the current settings of the photoelectric sensor, re-
setting up the photoelectric sensor and printing the new settings,
setting up the left margin, setting up the top margin, alignment
adjusting for bi-direction print, and run-in printing etc.
A Hexdump-function is available and a soft test for reading a
magnetic stripe.
Inquire current parameters settings of both software and hardware,
including the version (version number, nonstandard issue tag,
special simulation etc.), a hardware configuration (characters
generators, optional interface connections, a scanner, the
sprocket), PCB ID, firmware check sum etc.
Printer Operation
2-5