Options
5.1.6 Corresponding Menu Setting up
Auto choose tractor working mode for each port (RS1 or CX).
There are three items under CONFIGURE menus set:
S MANUAL
S TRACTOR
S NORMAL
5.1.7 Configure Option Tractor
Parameter
TRACTOR MODE (RS1)
TRACTOR MODE (CX)
PAGE LENGTH (1")
PAGE LENGTH (1/60")
TOP ADJ (1/20")
LEFT MARG. (1/20")
TEAR WAIT (1s)
TEAR BF. SW
Note:
The Off line operations, such as MENU PRINTING or PRINTING TEST, are only
supported on normal mode.
5-6
OPTION TRACTOR
Option
Explanation
TRACTOR
TRACTOR: when this item is selected, PR 9 switches to
MANUAL
tractor mode if any date arrives at the corresponding
Normal
port.
MANUAL: when this item is selected, PR 9 working
mode, normal mode or tractor mode, is only
determined by buttons. It is also the default selection for
TRACTOR
all ports.
MANUAL
NORMAL: when this item is selected, PR 9 switches to
Normal
normal mode if any date arrives at the corresponding
port.
11
Set page length for Tractor mode in steps of 1 Inch.
1 up to 30
0
Set page length for Tractor mode in steps of 1/60 Inch.
0 up to 50
0
Adjust the Top Of Form in steps of 1/20 Inch
-6 up to +6
0
Set Left Margin for Tractor mode in steps of 1/20 Inch.
-6 up to +20
10
Set Tear Off time in seconds for Tractor mode.
3 up to 15
YES
NO