Table of Contents
Advertisement
Appendix D EPSON LQ-Emulation Commands
ESC \ n1 n2
Set relative horizontal printing position
Hex:
(1B 5C n1 n2)H
Decimal:
(27 92 n1 n2)D
Octal:
(33 134 n1 n2)O
The defined unit will be different according to print quality and PNS item in menu:
Draft: move (n2 * 256 + n1)/120 inch from the current position
LQ: move (n2 * 256 + n1)/180 inch(ESC/P) or (n2 * 256 + n1) (horizontal unit/3600)
inch (ESC/P 2) from the current position.
If this command is received consecutively , the consecutive (n2 * 256 + n1)
Note:
will be accumulated and set the low 15 bits as valid movement parameter.
D-14
Set Relative Horizontal Printing Position
Advertisement
Table of Contents
