Configuring the Printer
3.5
PRINTING TEST
There are five test printouts available:
S User s Guide
S Chinese Characters
S Ascii Character Set
S Character Attributes
S Dr. Grauert (print a letter)
3.5.1 USER S GUIDE
In the User s Guide you will find detail information. So it is possible to print out the User s
Guide by your self. If this function is selected, the printer asks for A4 sheets. After
inserting an A4 sheet the printer starts the print-out.
With the [STATION 2] key it is possible to skip the selection.
3.5.2 CHINESE CHARACTER
With this selection are three prints possible:
S Printing All Fonts
S Print Two Byte Font
S Print Four Byte Font
3.5.3 ASCII CHARACTER SET
The stored ASCII character sets are:
S GB
S ROMAN
S CHINESE 1
S CHINESE 2
S INT 437
S CANADIAN FRENCH
S OCR A
S OCR B
3.5.4 CHARACTER ATTRIBUTES
All included character attributes are printed here.
3.5.5 Dr. GRAUERT
This test printout produces a standard letter (ECMA-132) which can be used for
measuring the printer's throughput.
3-26