Table of Contents
Advertisement
3.6.6 PRINT PHOTO VALUES
With the selecting of Print Photo Values you can start a print out photo sensor values.
The yellow Ready and green Station 1 lamp lights up.
The printer starts printing the values after inserting a paper.
If you want to leave the off-line mode press [STATION 2] and
*) The displayed line is depending on the selected Emulation.
Sample of the Print Photo Values:
Key or action
Select Adjustment
[COMPRESS
]
until the LCD shows:
[STOP # ] to select
[STATION 2]
[COMPRESS
] together.
Press [STATION 2] to ignore.
Configuring the Printer
Two line display
ADJUSTMENT
PHOTOSENSOR VALUE
ADJUSTMENT
PRINT PHOTO VALUES
PRINT PHOTO VALUES
INSERT A4 SHEET
PRINT PHOTO VALUES
FINISH, PRESS STAT2
ADJUSTMENT
PRINT PHOTO VALUES
SAVE PARAMETERS
#
ACCEPT ST2 = IGNORE
PR9 SERIAL1 OLIVETTI *)
ON-LINE
3-31
Advertisement
Table of Contents
