Ibm Configure - Epson PR9 User Manual

3.4.7 IBM CONFIGURE

The following items can be modified according to the IBM parameters.
Note:
In the different emulations the items shown are not equal. The option's which are
printed in bold indicate the actual setting.
Parameter
EMULATION
AGM
HIGH SPEED PRINTING
CPI
LPI
CHARACTER DEFINITION
LF+CR
CR+LF
LEFT MARG. (1/60")
TOP MARG. (1/60")
IBM CONFIGURE
Option Explanation
IBM X24 Select your printer
IBM PPII emulation
NO NO = ignore AGM graphic
YES printing
YES = AGM graphic
printing is active
YES Selecting high speed
NO printing mode.
A4 SHEET NO = no draft mode.
A4 SHEET = always draft
FAN FOLD PAPER
mode when the paper is A4
Sheet.
FAN FOLD PAPER =
always draft mode when the
paper is fan fold paper.
YES: = the print mode
always is draft.
10 Defines the number of
12 characters printed per inch.
15
17.1
20
5 Defines the number of lines
6 printed per inch.
8
DRAFT Selecting the printing
LQ quality.
NO YES: LF = LF + CR
YES NO: LF = LF
NO NO: CR = CR
YES YES: CR = CR + LF
0 To adjust the left margin
-6 up to +6 more to left or right in units
of 1/60" inch (about 4 mm).
0 Adjust the top margin in
-6 up to +6 units of 1/60 inch (about
4 mm).
Configuring the Printer
Note
AGM is only for IBM
X24 printers valid.
TOF = Top Of Form
3-17