Epson PR9 User Manual page 183

Appendix B OKI-Emulation Commands
FS p
This command code sets Chinese character double width mode.
Hex (1C 70)H
Decimal (28 112)D
Octal (34 160)O
This mode is valid when working mode is SHIFT JIS mode or when working
Note:
mode is CHINA mode. When this mode is valid, all printable characters will
be specified as double width characters.
Code ESC R, ESC q, ESC g, and ESC < can reset this mode.
FS q
This command code resets Chinese character double width mode.
Hex (1C 71)H
Decimal (28 113)D
Octal (34 161)O
This code can also clear the Chinese character's double width attribute that
Note:
made by code ESC U.
FS r
This command code sets CHINA Half Corner Character mode and reset Subscript Mode,
Subscript Mode, Superscript / Subscript Mode.
Hex (1C 72)H
Decimal (28 114)D
Octal (34 162)O
CHINA Half Corner Character mode is only valid when working mode is
Note:
CHINA. Code FS s can reset this mode.
FS s
This command code resets CHINA Half Corner Character mode.
Hex (1C 73)H
Decimal (28 115)D
Octal (34 163)O
B-36
Set Chinese Character Double Width Mode
Reset Chinese Character Double Width Mode
Set CHINA Half Corner Character Mode
Reset CHINA Half Corner Character Mode