Tabulation; B.2.7 Tabulation - Epson PR9 User Manual

B.2.7

Tabulation

S ESC L : Set horizontal tab stops
S DC4 : Set Vertical Tabulation
S HT :
Horizontal tabulation
ESC L
Set horizontal tab stops
Hex (1B 4C)H
Decimal (27 76)D
Octal (33 114)O
ESC L
This command code specifies horizontal tab stops to:
(n(i)i * 256 + n(i+1))/180 inch (i = 2k+1)
left margin + (n(i)i * 256 + n(i+1))/180
Maximal 30 tab stops are allowed.
Note:
HT
Set horizontal tabulation
Hex (09)H
Decimal (09)D
Octal (11)O
If the H-tab had already set by code ESC L, then this command code moves the
presentation position to the right to the next horizontal tab stop, otherwise OKI PNS2061
in menu will determine whether do CR and LF one time at this moment or not.
DC4
In PR 9,this command code gets characters continuously until printer encounter zero or
current character is less then the former one.
Hex (14)H
Decimal (20)D
Octal (24)O
n1 n2 n3 n4
Appendix B OKI-Emulation Commands
...... n(2x - 1)
#
right margin
Set Horizontal Tab
n(2x) NULL NULL
Horizontal Tabulation
Set Vertical Tabulation
B-21