Epson PR9 User Manual page 41

Parameter
PNS #2021K
PNS #2022K
PNS #2023K
PNS #2024K
PNS #2025K
PNS #2026K
OLIVETTI CONFIGURE
Option Explanation
NO Process of invalid code:
YES NO = command error if
invalid code is received;
YES = ignore the invalid
code.
NO Setting the bottom margin
YES (Bottom of Form).
NO = normal mode;
YES = PR 9 feed paper to
the max position when the
current vertical position is
right for the bottom limit, but
the feed paper value
exceed the bottom limit.
And PR9 report ESC r X
when it receive the
command ESC j.
NO Selecting the special
YES function of the command
ESC ! sp nnn;
NO = same as PR2, the
space setting of the full
corner characters is same
as half corner characters.
YES = the space setting of
the full corner characters is
double as half corner
characters.
NO NO = normal mode;
YES YES = ASCII characters
printing and the graphic
printing in a same line are
enabled.
NO reserved
YES
NO reserved
YES
Configuring the Printer
Note
Only displayed if PNS
SELECTION is set to
YES.
Relative with the
PNS7011K of PR2E.
Only displayed if PNS
SELECTION is set to
YES.
Relative with the
PNS7015K of PR2E.
see Control Codes
Only displayed if PNS
SELECTION is set to
YES.
Relative with the
PNS7014K of PR2E.
Only displayed if PNS
SELECTION is set to
YES.
Relative with the
PNS7016K of PR2E.
Only displayed if PNS
SELECTION is set to
YES.
Only displayed if PNS
SELECTION is set to
YES.
3-13