Oki Configure - Epson PR9 User Manual

3.4.6 OKI CONFIGURE

The following items can be modified according to the OKI parameters.
Note:
In the different emulations the items shown are not equal. The option's which are
printed in bold indicate the actual setting.
Parameter
AUTO COMPRESSION
LINE LENGTH COMPRESS
COMPRESS PROPORTION
FAN FOLD LEFT MARG.
PAPER EMPTY WARNING
ONE BYTE BUFFER
HIGH SPEED PRINTING
LPI
OKI CONFIGURE
Option Explanation
NO Determine whether
YES automatically condense
current line for printing,
when current line length
exceeds the allowed line
length.
NO Determine whether the line
YES width to compress.
101/LINE (85%) Select the proportion of
108/LINE (80%) automatically on the
115/LINE (75%) condensation mode.
123/LINE (70%)
133/LINE (65%)
144/LINE (60%)
157/LINE (55%)
170/LINE (50%)
0 Select the left margin for
0 up to 7 the columns of fan fold
paper in n/10 inches.
NO NO = blocking of the
YES parallel port, when there is
no paper in the PR 9.
YES = no blocking
NO NO = the parallel port is not
YES set into a one byte buffer.
YES = the parallel port is
set into a one byte buffer.
YES Selecting high speed
NO printing mode.
A4 SHEET NO = no draft mode.
A4 SHEET = always draft
FAN FOLD PAPER
mode when the paper is A4
Sheet.
FAN FOLD PAPER =
always draft mode when the
paper is fan fold paper.
YES: = the print mode
always is draft.
5 Determines the number of
6 lines per inch.
8
Configuring the Printer
Note
3-15