Table of Contents
Advertisement
Appendix B OKI-Emulation Commands
ESC E
This command code sets a sub mode, Elite high density print mode.
This sub mode is only valid when working mode is WESTERN. Under this sub mode all
western characters will be printed with the pitch of 12 CPI and the quality of NLQ.
Hex
(1B 45)H
Decimal
(27 69)D
Octal
(33 105)O
ESC H
This command code sets a sub mode, Pica high density print mode.
This sub mode is only valid when working mode is WESTERN. Under this sub mode all
western characters will be printed with the pitch of 10 CPI and the quality of NLQ.
Hex
(1B 48)H
Decimal
(27 72)D
Octal
(33 110)O
ESC I
This command code specifies the print quality to NLQ.
Hex
(1B 44)H
Decimal
(27 68)D
Octal
(33 104)O
ESC N
This command code sets a sub mode Pica high speed print mode.
This sub mode is only valid when working mode is WESTERN. Under this sub mode all
western character will be printed with the pitch of 12 CPI and the quality of draft.
Hex
(1B 4E)H
Decimal
(27 78)D
Octal
(33 116)O
B-16
Set Elite High Density ANK Mode
Set Pica High Density ANK Mode
Set High Density Print Mode
Set Pica High Speed ANK Mode
Advertisement
Table of Contents
