Getting Started
The operator can press down front power switch (3 in figure before) to power on
printer
now.
After power on:
- The ON (1) indicator will be light up
- After a short delay the READY (2), STATION 1 (3), and STATION 2 (4) indicator will
be all lighted.
Several seconds later the print head start initialization action. You hear a sound of
the
movement.
Only ON indicator will be light after initialization has been finished.
Any printing medium in the printer paper path will be ejected.
Note:
The display shows the message: PR9 SERIAL1 OLIVETTI *)
ON-LINE
*) The emulation (hear OLIVETTI) is dependent on your order.
1-8