Ribbon Installation - Epson PR9 User Manual

1.5 Ribbon Installation

Take out the ribbon Cassette (1) from plastic wrapping bag.
Installing:
Power the printer on.
- Remove the Ribbon Guide (6) by sliding down from the Ribbon Cassette (1).
- Open top cover.
- Swivel the green print unit lift handle (9) backwards to lift the print unit entirely.
- Move print head (10) to the centre.
- Insert the fixation pins (3) at the both ends of ribbon cassette (1) into the slots (11) at
both ends of print unit frame.
Try to push ribbon cassette (1) by rotation as shown in the picture above.
- Press the ribbon cassette fixation block (4) into both ends slot of print unit until you
hear a "CLICK".
Getting Started
1-5