Epson ET-8700 - All-In-Ones Printer Quick Installation Guide

Epson ET-8700 - All-In-Ones Printer Quick Installation Guide

Also See for ET-8700:

Advertisement

Epson ET-8700 - All-In-Ones Printer Quick Installation Guide

Unpack

  1. Remove all protective materials from the product.
    Unpacking the unit - Step 1
  2. Lift up the scanner unit and remove all protective materials from inside the product, then close the scanner unit.
    Unpacking the unit - Step 2
  3. Insert the output tray.
    Unpacking the unit - Step 3 - Insert output tray

Turn on and configure

  1. Connect the power cord to the back of the product and to an electrical outlet.
    Turn on and configure - Step 1 - Connect the power


Do not connect to your computer yet.

  1. Turn on the product.
    Turn on and configure - Step 2 - Turn on the unit
  2. Select your language, country, and time on the LCD screen.
    Note: You can change these settings later using the product's control panel.

Install ink supply units (ink packs)

Note:

  • The product is designed for use with Epson ink packs only, not third-party ink.
  • The ink packs included with the product are designed for product setup and not for resale.
  • After some ink is used for charging, the rest is available for printing.


Keep the ink packs out of the reach of children and do not drink the ink.

  1. Unlock and open the ink pack tray cover, then remove the packing material.
    Installing ink supply units - Step 1
  2. Press an ink pack tray to release it, then pull the tray out.
    Installing ink supply units - Step 2
  3. Remove and discard the protective piece from the ink pack tray.
    Installing ink supply units - Step 3
  4. Shake an ink pack 10 times, then remove it from the packaging.
    Installing ink supply units - Step 4
    Note: Do not touch the green chip on the ink pack.
    Installing ink supply units - Step 5
  5. Move the handle forward, place the ink pack into the ink pack tray until it clicks, then move the handle back to its original position.
    Installing ink supply units - Step 6
    Note: Make sure the ink pack is fully inserted and level with the top of the ink pack tray.
  6. Insert the ink pack tray into the printer. Repeat steps 2 to 6 for the other ink packs.
    Note: The ink packs are keyed to fit into the correct color slot. If you cannot insert the ink pack tray all the way, do not force it. Make sure the ink pack color matches the color slot on the printer.
    Installing ink supply units - Step 7
  7. Close the ink pack tray cover and lock it.
    Installing ink supply units - Step 8
  8. Press OK on the LCD screen to start charging the ink. Ink charging takes approximately 7 minutes. A message appears when ink charging is complete.

Load paper

  1. Make sure the product is done charging the ink, then pull out the paper cassette.
    Loading the paper - Step 1
  2. Slide the side edge guides all the way out and set the front edge guide to the paper size you are using.
    Loading the paper - Step 2
  3. Insert paper with the glossy or printable side down.
    Loading the paper - Step 3 - Insert paper
    Note: Make sure the paper is under the arrow mark for your paper type and loaded against the front edge of the cassette.
  4. Slide the edge guides against the paper, but not too tightly.
    Loading the paper - Step 4
  5. Keep the cassette flat as you insert it all the way, then pull out the output tray extension.
    Loading the paper - Step 5
  6. Select the paper settings on the product's control panel.

Connect the fax line

  1. Connect a phone cord to a telephone wall jack and to the LINE port on your product.
  2. If prompted, press Proceed on the LCD screen to set up the fax, or press Close to set it up later.

Install software

Note: If your computer does not have a CD/DVD drive or you are using a Mac, an Internet connection is required to obtain the product software.

To print from a Chromebook, go to www.epson.com/support/gcp (U.S.) or www.epson.ca/support/gcp (Canada) for instructions.

  1. Make sure the product is NOT CONNECTED to your computer.
    Installing software
    Windows: If you see a Found New Hardware screen, click Cancel and disconnect the USB cable.
  2. Insert your product CD or download and run your product's software package. For the latest software, visit:
    www.epson.com/support/et8700 (U.S.)
    www.epson.ca/support/et8700 (Canada)
  3. Follow the instructions on the computer screen to run the setup program.
  4. When you see the Select Your Connection screen, select one of the following and follow the on-screen instructions:
  • Wireless connection
    In most cases, the software installer automatically attempts to set up your wireless connection. If setup is unsuccessful, you may need to enter your network name (SSID) and password.
  • Direct USB connection
    Make sure you have a USB cable (not included).
  • Wired network connection
    Make sure you have an Ethernet cable (not included).

Mobile printing

Connect wirelessly from your smartphone, tablet, or computer. Print documents and photos from across the room or around the world:

  • Print directly from your iOS device. Simply connect your printer and device to the same network and tap the action icon to select the print option.
  • Use Epson Print Enabler (free from Google Play) with Android devices (v4.4 or later). Then connect your printer and device to the same network and tap the menu icon to select the print option.
  • Print remotely with Epson Connect and Google Cloud Print. Learn more at www.epson.com/connect (U.S.) or www.epson.ca/connect (Canada).

play.google.com

Any problems?

Network setup was unsuccessful

  • Make sure you select the right network name (SSID).
  • Restart your router (turn it off and then on), then try to connect to it again.
  • The printer can only connect to a network that supports 2.4 GHz connections. If your router offers both 2.4 GHz and 5 GHz connections, make sure 2.4 GHz is enabled.
  • If you see a firewall alert message, click Unblock or Allow to let setup continue.
  • If your network has security enabled, make sure you enter your network password (WEP key or WPA passphrase) correctly. Be sure to enter your password in the correct case.

There are lines or incorrect colors in my printouts

Run a nozzle check to see if there are any gaps in the printout. Then clean the print head, if necessary.

The product's screen is dark

Make sure your product is turned on, and touch the screen or press any button to wake it from sleep mode.

Setup is unable to find my printer after connecting it with a USB cable.
Make sure your product is securely connected as shown:
Connecting the unit with a USB cable

Any questions

Support

Visit www.epson.com/support/et8700 (U.S.) or www.epson.ca/support/et8700 (Canada) to download drivers, get FAQs, or contact Epson.

Call (562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 6 am to 8 pm, Pacific Time, Monday through Friday, and 7 am to 4 pm, Pacific Time, Saturday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply.

Recycling

Epson offers a recycling program for end of life hardware and ink packs. Please go to www.epson.com/recycle (U.S.) or www.epson.ca/recycle (Canada) for information on how to return your products for proper disposal.

Need paper and ink

Ensure peak performance and brilliant results with Genuine Epson Ink and specialty papers, engineered specifically for Epson printers. Find Genuine Epson Ink and specialty papers at www.epson.com (U.S. sales) or www.epson.ca (Canadian sales) and at Epson authorized resellers. Call 800-GO-EPSON (800-463-7766).

ET-8700 replacement ink packs
Color High- capacity Extra High- capacity
Black R02L R02X
Cyan R02L
Magenta R02L
Yellow R02L

Important Safety Instructions

burn hazardshock hazard
When using telephone equipment, you should always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury, including the following:

  • Do not use the Epson product near water.
  • Always keep this guide handy.
  • shock hazard Avoid using a telephone during an electrical storm. There may be a remote risk of electric shock from lightning.
  • Do not use a telephone to report a gas leak in the vicinity of the leak.


To reduce the risk of fire, use only a No. 26 AWG or larger telecommunication line cord.

EPSON and DURABrite are registered trademarks, EPSON Exceed Your Vision is a registered logomark, and Epson Connect is a trademark of Seiko Epson Corporation.
Designed for Excellence is a trademark of Epson America, Inc.
Mac is a trademark of Apple Inc., registered in the U.S. and other countries.
Android, Google Cloud Print, Chromebook, and Google Play are trademarks of Google Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.

© 2018 Epson America, Inc.

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Epson ET-8700 - All-In-Ones Printer Quick Installation Guide

Advertisement

Need Assistance?

Do you have a question about the ET-8700 that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents