Chapter 4 Troubleshooting; General Problems; Cannot Configure The Network Interface Or Cannot Print From The Network; Cannot Print Even If You Have Assigned The Ip Address To The Computer And The Printer - Epson SureColor SC-P10070 Network Manual

Chapter 4
Troubleshooting

General Problems

Cannot configure the network interface or cannot print from the network.

Cause
The printer settings or network settings may
be wrong.
Cannot print even if you have assigned the IP address to the computer and the
printer.
Cause
You have assigned an IP address to the
computer manually, but you assigned the IP
address to the printer by Automatic Private IP
Addressing (APIPA).

Unable to start EpsonNet Config.

Cause
You have added or deleted protocols after
installing EpsonNet Config.
What to do
First, check to see if you can print a status sheet, as described in "Printing
a Network Status Sheet" on page 47. If you can print a status sheet,
check the network settings; otherwise, set the interface mode of the
printer's control panel to Auto or Option.
What to do
Assign the printer's IP address so that it belongs to the same segment of
the computer. Use EpsonNet Config and the printer's control panel.
What to do
Uninstall EpsonNet Config and then reinstall it. See "Installing
EpsonNet Config" on page 31.
Epson Network Guide
Troubleshooting 46