Mailbox Builder Reports; The Mailbox Builder Report - Panasonic PanaVOICE system Technician Manual

2-68
Installing PanaVOICE with an OAIIntegmtion PanaVOICE2.0
Mailbox Builder Reports
The voice messaging system provides these reports to use with mailbox builder:
l
The Mailbox Builder Report
l
The Call Log Report
The Mailbox Builder Report
Immediately after mailbox builder finishes or is prematurely terminated, the voice
messaging system creates and displays the Mailbox Builder Report (BOXBURDLOG).
You can copythis report to a disk file or print it to a printer connected to the voice
messaging system. The report contains:
MailboxBuilder Status
The top of the report indicates the date and time the process was run, whether the
process ran successfully, if there were any conflicting System IDS, or if the process
terminated by a serial link error.
MailboxInformatioll
The body of the report lists each mailbox added, including the Panasonic DBS
telephone system port number, the extension number, and the name programmed
for that port. lf an error occurs when mailbox builder attempted to add a mailbox,
the report adds an asterisk (*) next to the mailbox information and adds a line
detailing the error (see Sample Mailbox Builder Report below).
Mailbox Builder Errors (jf applicable)
The bottom of the report includes an error message if mailbox builder did not run
successfully.
The table on page 2-70 provides a detailed description of the report data.