Subscribers And Guests - Panasonic PanaVOICE system Technician Manual

256 Installing PanaVOICE with an OAIIntegration PanaVOICX2.0
Figure 15 Subscribers and Guests: Subscriber Defaults: Notification
4.
Check the Default Message Waiting Indications. Verify that the Use message
waiting indication box is selected. Check that X appears in the Message lamp
extension field (Figure 15).
5. Configure the Default Message Notification. Typically, the Work Phone extension is
configured with a telephone number of X for the subscriber's extension. Leave the
Work Phone box cleared (Figure 15). You may select it for individual subscribers on
the Subscribers and Guests: Subscribers: Notification screen.
/:
Subsctibers
and
Guests
If you purchased this Integration Package to add to your existing voice messaging
system, you must make sure that certain settings are configured correctly for all
subscribers who were set up before the Integration Package was added.
To configure settings for individual subscribers:
1. To change an individual subscriber's settings, first go to Subscribers and Guests:
Subscribers and select the name of the subscriber from the list.
2. Configure the Subscriber Conversation for subscribers with Panasonic DBS large-
display phones. Go to the individual's Subscriber and Guests: Conversation screen
and clear the Play new messages hands-free box. Go to the Subscriber and Guests:
Permissions screen and clear the Use original version conversation box.
Note
Visual menus will not appear on the subscriber's display telephone if
the Play new messages hands-free box or the Use original version
conversation box is checked. However, constant message count will
still function properly.