Set Up The Host Software - Panasonic PanaVOICE system Technician Manual

Technician' s
Guide Installing and using Remote Maintenance
4155
Set
up fhe
host soffware
The host software is already installed and configured on the host computer. Follow
these steps if you want to change any of the default settings.
To set up the host software:
1. At the DOS prompt in the directory used by PanaVOICE, type CD HOST [*-IEn' elI to go
to the directory for the Remote Maintenance software.
2. Type PHONE (Center) to run the host Remote Maintenance Phone Book Setup pro-
gram. The Phone Book Menu with a Phone Book directory appears (Figure 23).
i 1
UWIkmte PHONE BWII SETUP Copyright 1988.95 kiton kcJmolagies Inc.
I
Figure 23 Phone Book menu for the host version ofRemote Maintenance
3. Use the arrow keys to select the DEFAULT Phone Book entry.
4. Press (F31 to select the Change option. The Phone Book Entry Screen appears
(Figure 24). The NAME field should read DEFAULX If this screen does not appear,
press a to return to the Phone Book menu. Repeat steps 3 and 4.
1
WIkmtc
FHOW BOOX SEIUP
Copgright
1388.35 Iriton Icchnologies Inc.
ii
-ll
Port
mRr:
2 I3
ii
Rflui: i4ee
ItODEtl: HUJJCS Extended
DIRL: Ione IEra: ulwbote
i
Lk?
<PgDn>,<' f>.<~>,<C>.<_)>,<InS>,~1>.<E~~>
<Fle>=Save:
aC>=&Capc :I
Figure 24 Defadt Phone Book entry for the host version of Remote Maintenance
5. Use the down arrow to move the cursor to LOGIN. lf you want to use a login name
other than the default login name, type it in and press (-1.