Configuring The Voice Messaging System; Application Setup - Panasonic PanaVOICE system Technician Manual

Technician's Guide
Installing Pana VOICE with an OAI Integmtion
253
Configuring fhe Voice Messaging Sysfem
To integrate the voice messaging system with the DBS, you need to set several param-
eters on the voice messaging system screens.
Application Setup
r
m
Rpplication Setup
IlllBBI
Site !aformation - lBpy
E@
--
I mb- iPmsataprIcbnlaseaI
Figure 12 Application Setup: Site information screen
1. Go to Application Setup: Site Information (Figure 12). This screen keeps important
telephone traffic and contact information in one place.
2. Specify the
Pilot Number.
This is the number subscribers will use to dial the voice
messaging system internally. This is also called the masterhuntgroup number. Go to
the Station pilot number field and type the pilot number (tr (Figure 12).
Note
The Station pilot number field must use a single extension number with
the Integration Package. It cannot be a range of extensions.
3. Go to Application Setup: Port Settings (Figure 13).