Preinstallation Checklist; Telephone System; For Both Panasonic Dbs And Dbs 824 You Will Need; Voice Messaging System - Panasonic PanaVOICE system Technician Manual

Technician's Guide
Installing PanaVOKE with an OAI Integration 2-39
Pre-lnstalla tion Check/is t
The following lists everything you need before installing the Integration Package:
Telephone
System
If you are using the Panasonic
Digital Business System 824:
l
Panasonic DBS 824 CPC-M software release 3.1 or higher
If you are
u&g the Panasonic Digital Business System:
l
Panasonic DBS CPC-AU or CPCB software release 8.1 or higher or CPC-EXVersion
1.1 or higher
For both Panasonic DBS and DBS 824 you will need:
l
An API
(Application Program Interface) Card and API Serial Port Connector
(W-43940) installed in the main cabinet of the telephone system
0 RS-232 serial link (the gray null modem cable with g-pin female and 25-pin male
connectors)
Order these from your Panasonic representative. Install the telephone system hardware
and software according to the Panasonic Digital Business System telephone system
documentation.
Voice Messaging System
12MB n&&&n free disk space (at least 70 minutes in the Available field in the
upper-left hand comer of the Banner screen)
A modem connected to a SLT extension for use with the Remote Maintenance
software
One 3 l/2 inch (1.4iMB capacity) high density floppy disk drive
Serial port with 16550 or higher UART support
Parallel port for the system key
Additional items
Access to the Panasonic DBS telephone system and system administration
terminal to configure the Panasonic DBS telephone system for the integration
A complete and accurate telephone directory for station users, including the
extension number and first/last names (for example, "101, Hugh Yale")
A sixoutlet power strip
Extra blank floppy disks for system backup and copying files
A phillips screwdriver