Using The Coml Port; Running Syschk - Panasonic PanaVOICE system Technician Manual

Technician's Guide Installing PanaVOICE with an OAIIntegration 2-S
Checking fhe COM
fort
and Voice Boards Using SYSCHK
After you install the integration software, you must test the voice messaging system
computer's data port to verify that it is configured correctly for the integration. Do this
with the software utility
SYSCHK
and a loopback connector. You must restart the
system after running SYSCHK.
Your integration uses the COMl port on the voice messaging system computer to share
data with the.Panasonic DBS telephone system. lf you have an internal modem installed
on your existing voice messaging system for use with the Remote Maintenance pack-
age, that modem may currently be using COMl. You must use the COMl serial port
for
the integtation with the
Panasonic DBS
telephone system, and reconfigure the modem
to use COM2.
Running SYSCHK
The SYSCHK utility is stored in the voice mail directory (for example, C:\VMAIL).
SYSCHK can test:
l
The internal modem
l
The serial port
If any of these items is configured incorrectly, the integiation may fail. Test the serial
port with a loopback connector plugged into the COM port you want to test.
1
@u-e 11 Loopback connector
25-Pin
COM Port
r
O-Pin
COM Port
Loopback Connector