Table of Contents
Advertisement
Opening Your Mailbox (Mailbox Log in)
Call VPS
+
Mailbox No.
*
Password +
Subscriber's
Main Command Menu
If you just want to record a
message in someone else's
mailbox, you do not have to
use this procedure.
See the following topic in
Chapter 4.
• Recording Messages (for
any caller)
• Recording Messages (from a
rotary phone)
If your company is using a
Panasonic KX-TD series tele-
phone system, you can directly
access your mailbox just by
dialing the number of the V.M.
Service, depending upon Sys-
tem Programming. Check with
your System Manager.
Tip
Step 1 —
If no ports are assigned to
Voice Mail Service, press
#
after calling the
6
VPS.
To access Subscriber Services, you must open your
mailbox first. Follow the operation below.
1
#
2
3
4
Dial an extension number which is connected
to the Voice Mail Service.
Good morning/Good afternoon/Good evening
Welcome to the Voice Processing System.
If the system is equipped with multiple lan-
guages (up to three languages), you will hear
a selection prompt as follows.
(ex.)
For English, press [7].
For French, press [8].
For Chinese, press [9].
If you hear the above prompt, press the
number of the appropriate language.
Please enter your party's mailbox number.
To enter by name, press [#] and [1].
If you are using a rotary telephone, stay on
the line.
To call the operator, press [0].
Press
, then enter your mailbox number.
*
Enter your password, followed by [#].
Enter the password if you have one.
You are now in the main command menu.
1-2
Advertisement
Table of Contents
