Panasonic PanaVOICE system Technician Manual page 131

3126
.%m'ngUp
theApplication PanaVOICE2.0
Tmnsfer Options and Screening Options
Choose the call transfer options which you would like as defaults for new subscribers.
These apply only to subscribers with the Await Answer call transfer type.
Each subscriber can have two sets of call transfer options and the subscriber can
switch between these two transfer option sets by telephone. There are typical combina-
tions of options. For example, if two subscribers share the same telephone extension,
you could use the "State who the call is for" and "Confirm before connecting" options.
Choose call transfer options for both sets and specify which option set should be
active at first for new subscribers.
Tips
If you select the option to send calls directly to the voice mail, callers may
leav~ea message in a subscriber' s voice mailbox, but they cannot directly reach
a subscriber' s extension without going through the operator.
Worksheet 48: Default Subscriber Call Transfer
Console Screen - Subscribers and Guests: Default Subs&xx Call Handlino
Transfer Action
Holding
0 Transfer calls through to 713
0 Send calls directly to voice mail
Transfer type (choose one):
El Await answer
0 Waft for ringback
•1 Release
3 Rings
El Allow holding when line is busy
Holding Type (choose one):
0 Touchtone holding
0 Voice-detect holding
Transfer Options (Active)
Screening Options
Select any transfer options which apply:
El Beep when connected
[II Confirm before connecting
!Zl State who the call is for
Select any transfer options which apply:
q Seep when connected
El Confirm before connecting
Cl State who the call is for
q Detect dial tone/hang-up calls
Choose one:
0 Don' t ask for identification
0 Ask for name
0 Ask for name, save with message
Choose one:
0 Don' t ask for idenafication
0 Ask for name
0 Ask for name, save with message
Choose the option which will be active:
0 Use transfer options 0 Use saeening options