Panasonic PanaVOICE system Technician Manual page 50

Technician's Guide Installing PanaVOICE with an OAIlntegmion
245
Note
Hunt group numbers vary based on the version of the Panasonic DBS
telephone system. For example, the CPC-AR version uses hunt group
numbers 79-86. The CPC-B version uses hunt groups 151-158 and the
CPC-M version uses 3134.
d. Dial l'TT# where 77Tis the trunk number that should ring the voice messaging
system. You see: PORT XXX-TlT : 0 (DAY RING PROG.).
e. Did l#. You see: PORTXXX-'ITT : 0 where 77Tis the next trunk number.
f. Repeat step oe" for each trunk that should ring the voice messaging system in
Day Mode.
2. Program Night Ring Assignments for Hunt Group Pilot Numbers:
a. Press~.
b. Dial 2#. You see: Night ring prog. (SELECT PORT#).
c. Dial XXX# where XXX is the hunt group number.
You see: Night Ring P.XXX (SELECT TRUNK#).
Note
Hunt group numbers may vary based on the version of the Panasonic
DBS telephone system. See previous note.
d. Dial TTT where 77Tis the trunk number that should ring the voice messaging
system. You see: PORT XXX-TlT : 0 (NIGHT RING PROG).
e. Dial l#. You see: PORTXXX-'ITT : 0 where 77Xs the next trunk number.
f. Repeat step "en for each trunk that should ring the voice messaging system in
Night Mode.
3. Program the Voice Mail Hunt Group for Terminal Hunting:
a Press-
b. Dial 3#. You see: Hunting Group (SELECT HUNT-G+).
c. Dial HH# where HHis the hunt group number you wish to assign the voice
messaging system. You see: HUNT-GHH PROGRAii (SELECT PROGRAM).
d. Dial l#. You see: HUNT-GHH OOl:*** (PILOTEXT. #).
e.
Dial PPP, where PPP is the pilot number for the voice messaging system hunt
group. You see: HUNT-GHH 002: 0 (HUNTING MODE).
f. Dial 0 for terminal hunting.
g. Press #until you see: HUNT-GHH 005:*** (MEMBER EXT. #).
h. Dial XXX# where XXY is the extension number of the first voice messaging
system port. You see: HUNT-GHH 006:*** (MEMBEREXT +#).