Install The Remote Computer's Software - Panasonic PanaVOICE system Technician Manual

4158 Installing and using Remote Maintenance
PanaVOXEZ.0
Install the remote computer' s software
Note
These instructions explain how to install the Remote Maintenance software
on the remote computer.
@
Before you install the remote version of Remote Maintenance software:
l
Make sure a modem has been correctly installed on the remote computer.
l
Find out which COM port the modem uses.
To bstall the remote version of Remote Maintenance software:
1.
2.
3.
4.
5.
6.
7.
8.
Make sure the DOS prompt shows the drive where you want to install Remote
Maintenance, for example C:\>.
Insert the
remote
Remote Maintenance Disk in the A\ drive and type PiINSTALL.
r-1.
Type
Y [t_1Enter)
to
confirm that you want to continue, or type N I-1
to cancel.
When the system asks
if you have installed a modem, type Y (clEnter). If you
have not
installed a modem, type N [clEnterj
to cancel.
When the system asks if you know the modem' s COM port, type Y [*-1Enterj. If you
do
not know the COM port, type N [a] to cancel.
Identify the modem' s COM port (1,2,3, or 4).
Once you identify the modem' s COM port, the program copies Remote Maintenance
onto the computer' s hard disk. It also creates a batch file (RR.BAT) in the root
directory of the
hard disk. This batch file allows you to start Remote Maintenance
any time by simply typing RR (clEnterj.
Once Remote Maintenance is installed, you must set up the remote software as
described in the next topic.