Panasonic PanaVOICE system Technician Manual page 10

I-4 Installing the PanaVOICEsystem
PanaVOICE2.0
hsfall fhe sysfem key
The system key must be properly installed before PanaVOICE can answer calls. The
system will only operate as a demonstration unit without the system key.
System Key
The system key connects to the parallel port of your computer. Any device that also
plugs into the parallel port (for example, a printer) must be plugged into the key. The
computer's parallel port, also called the printer port, is a 25pin, female, D-shaped
connector on the back of the computer.
Parallel Port
i - .-
Fgure 1 Parallel port for system key
To
connect
the
system key:
1.
2.
3.
Locate the system's parallel port.
Plug the male end of the system key (the end with 25 pins) into the female socket of
the parallel port. Tighten the screws to firmly attach the key to the socket.
If applicable, plug any cable that also plugs into the parallel port (such as a printer
cable) into the female end of the system key. The system key will not interfere with
the normal operation of a printer or other peripheral plugged into the parallel port.