Panasonic PanaVOICE system Technician Manual page 64

Technician's Guide Installim PanaVOICE with an OM Inteemtion 2-59
9. Go to Telephone System Setup: Integration Options (Figure 17).
10. Note that the voice messaging system automatically enables the OAI integration
through the Integration option string field which is located at the bottom of the
Telephone System Setup: Integration Options screen.
Note also that the voice messaging system automatically enables dialtone detec-
tion.
c4 Telephone System Setup
&A
Integration Options E *-
Figure I7 Telephone System Setup: Integration Options
11. Trunk mapping option. If desired, configure the system to route trunk calls to
specific message boxes. Trunks must be programmed to ring directly to the voice
messaging system ports to use this feature. (Otherwise, the trunk identification
codes may not be sent to the voice messaging system.)
Note No check is made on the validity of the System ID specified when you
enter it on the voice messaging system screen. If an invalid System ID is
specified for a given trunk, the system answers with the opening
greeting.
Go to Telephone System Setup: Integration Options. In the fields under the Trunk
Mapping section, type the trunk numbers and the System ID to which the trunk(s)
should route [*-r]). For example, in calls on trunks 1 through 5, route to box
number 700.
Note that the entries you make in the Trunk Mapping section display in the Integra-
tion Option String field in the format TMn-m=ID, where n is the first trunk number in