Test The Panavoice System - Panasonic PanaVOICE system Technician Manual

l-8 Installing the Pana
VOICE
system
PanaVOICE2_0
l
Program &nnk routing. Program which trunks (if any) will route to PanaVOICE
-
via the telephone system's analog ports. Specify the hunting order, or, if you are
i
using "pooled ringing" as described above, ring all trunks to all voice messaging
ports. Use the Panasonic DBS FF4 programming addresses for this purpose.
l
Define the
voice mail extension ports. If
you are using voice mail integration, you
may program the voice messaging ports as voice mail extensions. (See
Installing
PamVOICE with an OAZIntegration in this guide.) Otherwise, program them as
single-line extensions.
Special Telephone System Programming for Non-Integrated Systems
This section details the minimum necessary programming for DBS and DBS 824 systems
with a non-integrated PanaVOICE system. (For instructions on programming an inte-
grated system, see Instdling PanaVOKE with an OAI Integration in this guide.) Use
caution when setting other Panasonic DBS options to avoid conflicts which may affect
how the voice messaging system works.
To program the "Voice MaiI Tone" parameter to return busy tone to PanaVOICE:
1.
Press a.
2. For Panasonic DBS, dial 2# l# 21#. You see SYSTEM 021: 0 VOICE MAIL TONE.
For Panasonic DBS 824, dial 2# l# 20#. You see SYSTEM 020: 0 VOICE MAIL TONE.
3. Dial l# (to choose "Return Busy Tone").
To assign a terminal type to each voice mail extension port:
1.
2
3.
4.
5.
6.
7.
Dial the
first
voice
mail extension port number (DBS CPC-AlI range 9-72) (DBS CPC-B range: 9
144) (DBS 824 range: 324). You see:
EXTXXXPROGRAM @F3ECXPROGFUM).
Dial 2#. You see: EXTXXX 002:
1 (IELSEITYPEJ
For both Panasonic DBS and DBS 824, dial 10
(for Third-Party Voice Mail).
Press HOLD to go to the next port number.
Repeat steps 5-6 above for each voice mail extension port to be programmed.
To configure
voice maiI extension ports for digital connection:
1. Press[FF3).
2.
Dial the voice mail extension port number (DBS CPC-AI1 range: 9-72) (DBS CPC-B
range: 9-144) (DBS CPC-EX range: 9-144) (DBS 824 range: 3-24). You see EXT XXX
PROGRAM @ELEmPROGRAM).